Self Regulating Heat Trace Cable
More Information
Constructed of industrial grade 16 AWG buss wire with a tinned copper braid and optional overjacketing, SRL ensures operating integrity in Div. 2 hazardous environments as well as certain corrosive industrial environments. SRL heating cable has a maximum maintenance temperature rating of 150F (65C).
- Self-Regulating, Energy Efficient
- 16 AWG Buss Wire
- Circuit Lengths to 660 Feet
- Process Temperature Maintenance to 150F (65C)
- Maximum Continuous Exposure Temperature, Power Off, 185F (85C)
- Industrial Freeze Protection Applications
- Field Splicing Without Disrupting Heat Output
- 3, 5, 8 and 10 W/Ft.
- 120 and 208 - 277 Volt From Stock
- Approximate Size 3/8 x 1/8"
- Min. Bend Radius 1-1/8"
Features
- Energy efficient, self-regulating SRL uses less energy when less heat is required.
- Easy to install, SRL can be cut to any length (up to max. circuit length) in the field.
- Field splices can be performed easily in minutes with no scrap or wasted cold sections.
- SRL features lower installed cost than steam tracing, less maintenance expense and less downtime.
- SRL can be single overlapped without burnout, which simplifies heat tracing of in- line process equipment such as valves, elbows and pumps.
- Because SRL is self-regulating, over- temperature conditions are minimized.
- Chromalox termination, splice, tee and end seal kits reduce installation time.
Construction
Twin 16 AWG Copper Buss Wires Provide reliable electrical current capability. Semiconductive Polymer Core Matrix "Self-Regulating" component of the cable, its electrical resistance varies with temperature. As process temperature drops, the core's heat output increases; as process temperature rises, the heat output decreases. Polyolefin Jacket Flame retardant, electrically insulates the matrix and buss wires and provides resistance to water and some inorganic chemical solutions. Tinned Copper Braid Provides additional mechanical protection in any environment and a positive ground path. High Temperature Fluoropolymer or TPR Overjacket (optional) Corrosion resistant, flame retardant overjacket is highly effective in many environments. TPR coatings protect against certain inorganic chemical solutions. Fluoropolymer coatings are used for exposure to organic or corrosive solutions. These coatings also protect against abrasion and impact damage. |
SRM/E Self-Regulating Medium Temperature
Chromalox SRM/E self-regulating heating cable provides safe, reliable heat tracing for process temperature maintenance and freeze protection of pipes, valves, tanks and similar applications. Constructed of industrial grade 14 AWG buss wire with metal braid and optional overjacketing, SRM/E ensures operating integrity in most hostile industrial environments. The 420F (215C) maximum exposure temperature rating allows steam cleaning of process equipment with up to 300 psig steam.
- Self-Regulating, Energy Efficient
- 14 AWG Buss Wire
- Circuit Lengths to 780 Feet
- Process Temperature Maintenance to 302F (150C)
- Maximum Continuous Exposure Temperature, Power Off, 420F (215C)
- Industrial Process Maintenance Applications
- Industrial Freeze Protection Applications
- Steam Cleanable on Process Equipment Up to 300 PSIG
- 3, 5, 8, 10, 15 and 20 W/Ft.
- 120 and 208 - 277 Volt From Stock
Features
- Energy efficient, self-regulating SRM/E uses less energy when less heat is required.
- Easy to install, SRM/E can be cut to any length (up to max. circuit length) in the field.
- Field splices can be performed easily in minutes with no scrap or wasted cold sections.
- With lower installed cost than steam tracing, SRM/E features less maintenance expense and downtime.
- SRM/E can be single overlapped without burnout, which simplifies heat tracing of in- line process equipment such as valves, elbows and pumps.
- Because SRM/E is self-regulating, overtemperature conditions are minimized.
- Chromalox termination, splice, tee and end seal kits reduce installation time.
Enhanced Features
- Industrial Grade, 14 gauge buss wire has higher current capacity, allowing longer circuit lengths up to 780 feet.
- Superior matrix to buss wire bonding ensures overall operating integrity and performance.
- High output, 20 W/Ft. heating cable.
- All ratings are available from stock.
Construction
Twin 14 AWG Copper Buss Wires
Provide reliable electrical current capability. Semiconductive Polymer Core Matrix "Self-Regulating" component of the cable, its electrical resistance varies with temperature. As process temperature drops, the core's heat output increases; as process temperature rises, the heat output decreases. High Temperature Fluoropolymer Jacket Flame retardant, electrically insulates the matrix and provides corrosion resistance. Metallic Braid Provides additional mechanical protection in any environ- ment and a positive ground path. High Temperature Fluoropolymer Overjacket (optional) Corrosion resistant, flame retardant overjacket is highly effective in hostile, aqueous and chemically active environments. It also protects against abrasion and impact damage. |
ProductsHeaters Sensors Temp. Controls Controls & Relays Hot Runners Heat Trace Cold Weather Wire Accessories Insulation Pressure Relief Slide Products |
ServicesCredit Application Order Tracking Delivery Programs Stocking Programs R.M.A. Request Catalog Request Custom Quick |
CompanyAbout Testimonials Legal & Copyright Accessibility Blog |
SupportContact Account Managers FAQ Technical Information Instructional Videos Helpful Links Downloads Line Card |
Popular ProductsChromalox Heaters Watlow Heaters Watlow EZ-ZONEĀ® Watlow F4T MDI Hot RunnerProheat is an authorized distributor of Chromalox and Watlow heater products. Band Heaters Cartridge Heaters Strip Heaters Tubular Heaters Immersion Heaters Hot Runner Nozzles Hot Runner Systems Hot Runner Controllers |
© Proheat, Inc.