Heating Cable Accessories
Product Overview
The DL Series Installation Accessories for Chromalox heat tracing products represents the state of the art in heat tracing. Each model in the series is designed to satisfy the demands of a particular operation. These high-quality models combine a variety of functions in a convenient, easy to use and economical package.
More Information
|
Power Connection Box
|
|
Splice & Tee Box
|
|
End Seal Fitting
|
RTAS & RTAS-EP Ambient Sensing
|
RTAS is an ambient-sensing thermostat which is generally used for freeze protection in ordinary (non-hazardous) areas. The thermo stat is mounted through the end of the oblique sided enclosure lid. In fact, because there is so much room in this model, multiple heating cables can be terminated. The stainless steel sheathed, inverted bellows probe provides good sensitivity, resulting in more accurate control.
RTAS-EP is a modified version of the RTAS which utilizes a hermetically sealed switch. Since this switch has no arcing contacts, it can be used in Division 2 Hazardous Areas. |
Specifications
|
|
RTBC & RTBC-EP Bulb and Capillary
|
RTBC is a line-sensing thermostat which is generally used for process temperature maintenance applications in ordinary (non- hazardous) areas. The thermostat is mounted within the enclosure and the capillary is brought out through one of the openings in the bottom of the box. This design provides extra protection for the capillary, especially when the control is mounted on a pipe, for heat tracing applica- tions. The three foot long stainless steel capillary provides good flexibility in mounting locations.
RTBC-EP is a modified version of the RTBC which utilizes a hermetically sealed switch. Since this switch has no arcing contacts it can be used in Division 2 Hazardous Areas. |
Specifications
|
|
RTSS Solid State Line Sensing (RTD) Control
|
RTSS is a line-sensing solid state controller which is used for process temperature maintenance applications where more precise temperature control is required. This control is supplied with a specially designed RTD sensor. The sensor has a stainless steel sheath and waterproof insulated TFE lead wires. The controller provides excellent accuracy and high current switching ability in a small enclosure.
|
Accessories
|
|
|
|
|
|
|
|
Junction Boxes
|
|
|
|
|
|
General Application Accessories
|
|
|
|
|
|
HTLS Single-Loop Heat Tracing Line Sensing Control Panel
|
HTLS is a microprocessor based Temperature Control and Monitoring System for Heat Trace Control. The HTLS provides On/Off or PID Control, Alarms for High/Low Temperature, Ground Fault Leakage, and Low Current Alarm. The HTLS Single Loop Panel includes the complete pre-wired Solid State relay mounted on a External Heat Sink, Current Transformers to measure current and monitor ground leakage, terminal blocks for field connections, and a NEMA 4X Fiberglas ® Enclosure.
|
Technical Specifications
| Supply Voltage: | 120, 208, 240, and 277 |
 |
|
| Vac Operating Environment: | 30 - 104ºF (-1 - 40ºC) -30 - 104ºF (-34 - 40ºC) with enclosure heater option |
| Communications: | RS-485 MODBUS ® |
|
|
| Input: | Thermocouple J, K, L, N, R, S, RTD, Current, Voltage Field Programmable for C or F |
| Output: | Solid State Relay rated @ 30 amps @ 40ºC Current |
|
|
| Alarm (Low): | 0 - 30 amps in 1 amp increments |
| Ground Fault Alarm Trip: | 5 - 100mA |
|
|
| Temperature Alarms: | Process, Deviation, Band, High/Low, Latching/ Non-Latching (Manual/Automatic Reset) Programmable. |
| Control Modes: | Field Selectable On/Off, PID, SMART |
|
|
HTLS Heat Tracing Line Sensing Control Panel Series 8000/12000/24000
|
The IntelliTRACE HTLS Series is a microprocessor based Control/Monitoring and Power Management/Distribution system for Heat Trace Applications. The IntelliTRACE Multi-Channel Heat Trace System provides Alarms for High/Low temperature, continuity, ground fault leakage, and sensor faults. The Advanced Features include a Color Touchscreen Operator Interface Panel that provides simple programming with no keyboards or cryptic labels. The panel displays loop status, alarm conditions and graphics on process temperature, setpoints, and currents. With the built-in power distribution, the IntelliTRACE multi-loop provides reduced material, installation, and maintenance costs. The load management feature elimi nates the need for expensive ground fault breakers, limits inrush current and systematically interrogates all circuits for continuity, ground fault leakage, sensor faults, and temperature alarms.
|
ProductsHeaters Sensors Temp. Controls Controls & Relays Hot Runners Heat Trace Cold Weather Wire Accessories Insulation Pressure Relief Slide Products |
ServicesCredit Application Order Tracking Delivery Programs Stocking Programs R.M.A. Request Catalog Request Custom Quick |
CompanyAbout Testimonials Legal & Copyright Accessibility Blog |
SupportContact Account Managers FAQ Technical Information Instructional Videos Helpful Links Downloads Line Card |
Popular ProductsChromalox Heaters Watlow Heaters Watlow EZ-ZONE® Watlow F4T MDI Hot RunnerProheat is an authorized distributor of Chromalox and Watlow heater products. Band Heaters Cartridge Heaters Strip Heaters Tubular Heaters Immersion Heaters Hot Runner Nozzles Hot Runner Systems Hot Runner Controllers |
© Proheat, Inc.
