Mica Strip Heaters

Products > Heaters > Strip Heaters > Mica Strip Heaters
 
  Ogden Mica Strip Heaters Fastheat Mica Strip Heaters Thermal Mica Strip Heaters IHCo Mica Strip Heaters Rama Mica Strip Heaters Glenn Mica Strip Heaters Omega Mica Strip Heaters Tempco Mica Strip Heaters
 

Mica Strip Heater

Versatile, efficient and economical, the Mica Strip Heater is of the same construction as the Mica Band Heater in flat design. Because of the range of dimensions and configurations possible, these units furnish even heat distribution for use in hot plates, sealing equipment, hot stamping, dies and molds and hundreds of other surface heating applications.

T1, T2 & T3 terminals have 10-24 thread and require 15/16" clearance from surface being heated. B1, B2 & B3 require 1/2" clearance.

Watt densities to 35 watts per sq. in. Standard thickness is 5/32” or 3/16". When ordering, specify: length and width, type of termination, wattage and voltage (resistance tolerance +10; -5%) and special features.

  
 

 
Standard Specifications
  Length
Minimum without mounting holes 2-1/2”
Minimum with mounting holes 3-1/2”
Maximum Consult Proheat Inc.

Width
Minimum, all types except T2 3/4”
Minimum, Type T2 1-3/4”
Maximum Consult Proheat Inc.

Thickness
Nominal 3/16”

Sheath Temperature
Maximum, Standard units 900° F 482° C
Maximum, Stainless Steel Sheath 1200° F 650° C

Wattage
35 Watts/sq in. Recommended Max.

Terminals
10-24 x 7/16” Post Term. or 12” Flexible leads

Voltage
Maximum 480VAC


Options

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T

 Flexible Armor (BX) installed over flexible leads
Metal Braid installed over flexible leads
Flexible leads—Teflon and fiberglass insulated nickel or nickel clad conductor
Strain relief Bracket
Terminal box
Flexible armor in right angle
Thermocouple or clearance holes
Button terminals
Appliance pins
Twist lock plug installed on leads
Additional thickness – specify. Standard thickness is 5/32” or 3/16”
Leads—specify option A, B, or C
Dual voltage – specify
Stainless steel sheath – designed for higher sheath temperatures
Grounding stud
Post terminals
Mounting slots 1/4” x 3/8” – one at each end of strip
Mounting slots 1/4” x 3/8” – specify location
No mounting slots