Quartz Radiant Process Heaters

Products > Heaters > Infrared Heaters > Quartz Radiant Process Heaters
 
  Ogden Quartz Radiant Process Heaters Tempco Quartz Radiant Process Heaters Watlow Quartz Radiant Process Heaters Spectrum Quartz Radiant Process Heaters

Qaurtz Radiant Process Heaters  
 


• Clear red color on translucent quartz tube at optimum design
• Infrared wave length at energy peak of 2.5/3 microns
• Quick heat and cool response
• 80% of rating in 20 seconds, 100% full heat in 40 seconds
• Designed for horizontal use
• Standard diameters: 1/2" and 5/8"
• Standard watt density: 35-40
• Lengths to 60", consult Proheat for longer lengths
• Special ratings or applications Consult Proheat
• Mounting hardware available
 




Modular Qaurtz Heater Assemblies


A resistance wire helix is enclosed in a small diameter quartz tube and mounted in a special housing. The two sizes are designed to be installed in the same dimensional spacing as the Ceramic Infrared elements. Quick temperature response is the Modular Quartz Heater Assemblies' advantage.

Golden-Ray(TM)Qaurtz Radiant Process Heaters


An applied gold exterior reflects the radiant energy produced by the Golden-Ray Quartz Radiant Heaters through the opening area only. The produced radiant energy is directed to the process, improving element efficiency by as much as 22%, testing has shown. Energy cost savings are realized. Reflectors are often not needed. Surrounding work area temperatures are cooler. The size of the opening can be varied as illustrated to control the direction and width of the Golden-Ray's energy output and intensity to the process. Golden-Ray Quartz Radiant Heaters feature quick heat and cool response, a 2.5 - 3 micron wave length at peak energy and are designed for horizontal use only. Then decide the appropriate Golden-Ray opening for the particular process.


QRH1 Qaurtz Lamp Infrared Heaters


The most recent addition to the Proheat infrared product line is the QRH1 Quartz Lamp Infrared Heater. Translucent fused quartz provides the most efficient heat transfer capability and the quickest responding radiant heat source available. A tungsten filament is centered in a hermetically sealed quartz tube and insulated with an inert gas. Peak wave length is 1 - 1.5 microns, in the near band of the electromagnetic spectrum. The element temperature is 4000°F and very bright when in operation. Faster process speeds are possible compared to other infrared heat sources. Heat-up and cool-down are especially quick. QRH1 Quartz Lamp assemblies include an easily installed, rugged aluminum housing with a polished reflector. Along with FP Flat Panel, Black Body Ceramic, HR Metal Sheath and Quartz Tube heaters, the QRH1 Quartz lamp gives Proheat the most comprehensive selection of radiant heat sources available.

High Process Temperatures
Short wave length, high intensity infrared heat source can increase work speeds.

Quick Heat and Cool Response
Immediate operating temperatures and quick cool-down for web or conveyorized processes where work speed may slow or stop. Elements are resistant to thermal shock. Careful handling and protection are required.

Horizontal Mounting Only
Housing mounts easily in any position in horizontal plane.

Control
Quartz Lamp Infrared Heaters are controlled using phase angle fired SSR's, SCR's or variable transformers. Do not use ON-OFF control.

Housing
Polished aluminum reflector is easily cleaned to provide efficient operation. Snap in protective grills are available.