BriskHeat® Controllers and Sensors

All applications that require heat must be controlled. There are two primary factors to look at when choosing your temperature controller and/or sensor.

How precise do you need the controller or sensor to be?: Some applications can handle a bigger range of precision (e.g. freeze protection) and some applications must be as precise as + or - 1F (.55C) (e.g. CVD).

Where will the controller or sensor be located?: You will need to make sure that your controller or sensor can handle the outdoor or hazardous-area conditions if that is where it will be functioning.

Below is a guide that will help determine the best controller or sensor for you.

Sensors

Automatic On/Off Thermostat Temperature Sensor (TD Series)

Perfect for freeze protection applications and where precision is not as critical. Turns the heater on and off at predesignated temperatures.

Pending

Class I Division 2

with Conduit Fitting (TD101X series)

Features

Choice of Several Temperature Settings to Turn Heater On and Off
Mounts to Surface
Average Precision of + or - 15F (8.33C)
Up to 277 VAC
25 Amp Capacity
Can be Used Outdoors
Optional 1/2" NPT Flexible Conduit Fitting
Additional Information

Controllers:

Option 1: For Industrial and Outdoor Locations:

All-Purpose Bulb and Capillary Temperature Controller (TB250N Series)

Great all-purpose temperature controller good for most of your industrial applications. Controls one individual circuit. Compliments our line of silicone rubber heating blankets and heating cable.

Features

Manually set your Desired Temperature
Choose Between Three Separate Temperature Ranges
Average Precision of + or - 5F (2.77C)
Up to 277 VAC
22 Amp Capacity
Can Be Used Outdoors (Enclosure Rated NEMA 3R)
Additional Information

Hazardous-Area Bulb and Capillary Temperature Controller (TB110N Series)

Functions just like the all-purpose temperature controller but can be used in hazardous environments. Choice of one or two set point models. Compliments our line of silicone rubber heating blankets and heating cable.

Class I Division 2 Groups B,C, and D

Class II Division 2

Class III

Features

Manually set your Desired Temperature

Choose Between Two Separate Temperature Ranges

Average Precision of + or - 5F (2.77C)

Up to 480 VAC

22 Amp Capacity

Can Be Used Outdoors (Enclosure Rated NEMA 7 and 9)

Additional Information

Create-Your-Own Bulb and Capillary Temperature Controller (TB4000 Series)

Go ahead, create your own temperature controller. You can choose to have a high amp capacity or add safeguard alarms to your new heating application. This is the temperature controller that works for you. Use this checklist to design your controller.

Features

Manually set your Desired Temperature
Average Precision of + or - 5F(2.77C)
Up to 480VAC
Can Be Used Outdoors (Enclosure Rated NEMA 4X)
Additional Information

Ambient Sensing Capillary Temperature Controller (TB261N Series)

Designed to sense ambient conditions.

Features

Manually set your Desired Temperature: Range of 20 to 110F (-7 to 43C)
Precision: Dependent on the variance between ambient and surface conditions when used for surface heating applications.
Up to 277VAC
22 Amp Capacity
Enclosure Rated NEMA 4X for Outdoor Use
Additional Information

Option 2: For Indoor or Laboratory Locations:

Portable Bulb and Capillary Temperature Controller (TS0 Series)

Perfect for lab and other indoor situations. Completely portable and plugs right into the wall without any wiring. Temperature control does not get much easier.

Features

Portable, Plug and Play
Easy Access to Control Dial
Choose Between Two Separate Temperature Ranges
Average Precision of + or - 5F (2.77C)
120 or 240VAC
15 Amp Capacity
For Use Indoors
Additional Information

Digital PID Thermocouple Temperature Controller (BriskONE Series)

For extreme precision in a single zone, use the BriskONE PID Thermocouple Temperature Controller. This digital controller is completely portable and plugs right into the wall. Ideal for lab environments and other indoor applications.